ukdream

HomeNewsWhat is the process of making a ukulele?

What is the process of making a ukulele?

2022-07-21

What is the process of making a Ukulele ?

1. In the choice of wood, it is generally believed that the material suitable for the production of xylophone is the rare hardwood tree koa in Hawaii and kauaacacia in Hawaii. Light brown, beautiful wood grain, high-grade flame-like texture, but long production cycle and low output value.


2. The panel and back panel are processed, polished and fixed according to the fixed template. Of course, the template must be precise in order to guarantee the piano's beautiful curvature, precise articulation and good resonance.

3. The small guitar can be made into various shapes, such as round, pineapple, pear, heart, etc. Can be designed according to customer requirements.


4. The panels, bottom panels and side panels are pasted with special wood glue, and then dried in the sun. At this point, the lower half of the piano is now formed, the part of the barrel and where it is pronounced.



5. For the production of the neck, generally the neck is made of Okoume, which is also a kind of mahogany. It is made in Africa. It's stiff and won't deform when you drill a hole in it.


6. The neck of the piano and the barrel are connected and fixed, and the inside is tightened with screws to ensure that it will not loosen after a long time.


7. Semi-finished products with fixed necks and cylinders should be placed for several days, and some deformed ones should be repaired.


8. The fingerboard that is attached to the neck is usually made of red sandalwood, which is native to Brazil and later cultivated in Southeast Asia. The pattern is like this.


9. According to the different requirements of customers, spray paints of various colors, and after the paint is dry for a few days, make the paint penetrate into the wood thoroughly, so that the paint will not fall off.


10. Press the strings and knobs. The strings used for the small guitar are nylon strings, which are flexible and have a long echo time. The knobs are generally metal for easy adjustment.


The above content about " what is the production process of ukulele " is introduced here, and I hope it will be helpful to you.

menglingchuang

Mr. menglingchuang

SEND INQUIRY

  • Tel:

    86-0752-3911196

  • Fax:

  • E-mail:

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send