What's the production process 1. In the choice of wood, it is generally considered that the suitable material for the small xylophone is Hawaii rare hardwood tree koa, kauaacacia. of HawaiiLight brown, beautiful wood grain, high-grade flame texture, but long production cycle, low output value. The 2. panel and back plate are processed, polished and fixed by the fixed formwork.Of course, the template must be accurate to ensure the piano's beautiful radian, precise pronunciation, and good resonance. 3. small guitar can be made into various shapes, such as round, pineapple, pear, heart, etc.Can be designed upon customer request.
4. panels, bottom panels, side panels are glued with special wood glue and then dried.The lower half of the piano was now formed, the part of the barrel and where it was pronounced. 5. neck production, the general neck choice is Auguman raw materials, which is also a kind of peach core.It was made in Africa.It is hard and does not deform when drilling into it. The neck and neck of the 6. piano and the barrel are fixed, tight with screws to ensure that it will not loose for a long time. 7. semi-finished products fixed in neck and cylinder shall be placed for several days, some deformation shall be repaired. The 8. fingerboard fixed to the neck is usually made of rosewood, native to Brazil and later cultivated in Southeast Asia.The pattern is like this. 9. sprays the paint of various colors according to the different requirements of the customer, and waits to dry for a few days to penetrate the paint thoroughly into the wood so that the paint will not fall off. 10. presses the strings and knob, and the little guitar uses nylon strings, with strong flexibility and long echo time.Knobs are generally metallic and easy to adjust. The above content on "What is the production process" Xiaobian is introduced here, I hope it will help you.
